A large client can keep a solo business busy for months. You know the work, spend less time on sales and see a full calendar. Then that client’s next booking starts to feel like money you cannot afford to lose.
Do not rush to drop a good buyer. First find out what would change if they paid late, cut the work or left. Their share of sales is a starting point. It does not tell you how much cash you need or how long it would take to replace the work.
The Business Development Bank of Canada describes dependence on a single client as a risk when losing that client would affect the whole business.[4] Check which bills you could still pay and how much time you would have to find other work. This guide does not set a safe client percentage.
Use one period and clear records
Choose a period long enough to include the work you want to review. A month can suit regular jobs. For uneven work, also check a longer period so one large bill does not decide the whole story. Use the same dates for all clients in each comparison.
Keep sales, unpaid bills and cash received in separate columns. Sales show the work charged in the period under the record basis you use. Unpaid bills show what clients still owe at the review date. Cash received shows what has reached you, even if it pays for older work.
Match each figure to its invoice, work record or bank entry. Remove sales tax you collect for the tax authority from this sales comparison. Treat refunds and credits the same way for each client. If your records are incomplete, mark the gap rather than guess a share.
The Australian government’s cash flow guide separates incoming and outgoing cash. It tells readers to label estimated figures and explain them.[2] Keep that distinction here too: a future booking is not a past sale or cash already received.
Look at more than the biggest invoice
Here is a made-up solo service business, in US dollars. These are teaching figures, not results from real clients. Assume all the listed sales are for work in the same month. Job-only costs include help and supplies tied to that client. They leave out shared business bills and the owner’s pay.
| Client | Sales for the month | Job-only costs | Left to cover shared bills and owner needs | Total work hours |
|---|---|---|---|---|
| A | $6,000 | $3,000 | $3,000 | 60 |
| B | $2,500 | $500 | $2,000 | 25 |
| C | $1,500 | $300 | $1,200 | 15 |
| Total | $10,000 | $3,800 | $6,200 | 100 |
A brings 60% of sales: $6,000 divided by $10,000. A also takes 60% of the recorded work hours. Those hours include calls, prep and revisions for the client. General sales and admin time still needs space outside this table.
After job-only costs, A provides about 48.4% of the $6,200 left for shared bills and owner needs. That share is lower because A’s job costs take more of its sales. The money left after job-only costs is often called contribution. It still has other bills to pay, so it is not take-home income.
Now suppose the unpaid-bill record shows $4,000 owed by A out of $5,000 owed by all clients. A accounts for 80% of unpaid bills. Check each bill’s due date before calling it late. A large unpaid share can mean a recent invoice, a slow payer or a disputed job. The percentage alone cannot tell you which.
Cash can tell another story. Suppose A paid $2,000 during the month and the other clients paid $4,000. A supplied one-third of the $6,000 received. The gap between its sales share and cash share is a reason to trace the invoices. It is not proof that the client will default. Opening unpaid bills and credits can also affect the comparison.

Model the loss of future work
Use a separate future plan to ask what happens if A stops booking. Do not erase an unpaid bill for completed work just because the client will not order again. Money already owed needs its own follow-up.
Assume the same monthly work pattern would otherwise repeat. If A leaves before any new job costs are committed, its $3,000 of job-only costs also stop. You lose its $6,000 of sales, but the amount lost toward shared bills and owner needs is $3,000.
B and C then leave $3,200 a month after their job-only costs. Suppose shared business bills are $1,500 and the owner’s planned draw is $2,500. A draw is cash the owner takes from the business for personal use. Those cash needs total $4,000, so the plan is short by $800 each month.
If the provider has $4,800 truly available for this gap, that covers six months at the same shortfall. The six-month result holds only while the monthly gap stays at $800. It assumes the other clients keep paying, costs stay flat, and no other bill uses the reserve. It excludes tax payments and other cash needs not listed. Put those into a dated cash plan before relying on the result.
Some costs will not stop when a client leaves. You may already owe a helper, rent a tool for a fixed term or need to finish paid work. Keep those amounts in the first months of the plan. The business cannot save a cost merely by wishing the order had never happened.

Test a payment delay separately
A late payment can be harder on cash at first than losing an unstarted job. You may have already paid the costs of work the client has not paid for.
For this separate future-month test, start with $5,000 of usable cash. Expect all $10,000 of sales in the example to arrive as cash that month. Pay the $3,800 of job costs and the $4,000 for shared bills and the owner’s draw. You would end with $7,200.
If A’s $6,000 receipt slips outside the month, you receive only $4,000. Keep all job costs because the work still goes ahead. You end with $1,200 instead. The receipt delay changes month-end cash by the full $6,000. The earlier loss-of-work case removed costs too; this one does not.
These are separate scenarios. The $5,000 starting cash here is not the $4,800 reserve in the previous example. The future receipts also do not reuse the historical cash figures above. For your own plan, use one actual opening balance and trace every bill and receipt. Check dates within the month, since the lowest balance may come before month end.
Ask the buyer about the missing payment through your normal trusted contact. A booking promise or payment screenshot does not settle the cash plan. Agree any change to terms before doing new work that you cannot fund. If you face a dispute, use the terms and advice that apply to your location rather than assume you can stop all work at once.
Work out what replacement really means
Replacing $6,000 of sales is not always the right first target. In this example, A leaves $3,000 after job-only costs. A new job like C leaves $1,200. Two such jobs leave $2,400, which is $600 short of A’s contribution. Three leave $3,600.
Each new job takes 15 hours, so three need 45 delivery-related hours. Losing A frees 60 recorded hours. On paper, that leaves 15 hours for added sales work, setup or delays. Those jobs do not yet exist, and their actual hours may differ. The math only shows a workload worth checking.
Keep the kind of work in view. A set of small jobs that needs constant new sales could consume more time than one repeat client. Before you lower prices to fill the gap, compare complete costs and all your hours. Do not assume a new client will arrive just because the calendar has room.
A lower share can still leave the same risk
Suppose you keep A and add a new client with $2,000 of monthly sales. Total sales rise to $12,000. A’s share falls from 60% to 50%, though you still rely on its same $6,000 of sales. The new client’s costs and hours decide how much extra protection it gives you.
A still supplies the same $6,000 of monthly sales. The lower share alone does not show how much cash is at risk if A stops paying. Do not add low-value work simply to make the biggest client’s share look smaller. Check what the new work leaves after costs and whether you can still serve the clients you have.
Different client names can also hide a shared risk. Suppose A and B both depend on the same seasonal trade. Together, they supply $8,500, or 85% of the example’s sales. A quiet season could affect both. That is an assumed link for this example, not a prediction about a real trade.
BDC’s discussion covers risks shared across a city or sector as well as one client. Its pandemic-era survey of businesses in Alberta and Saskatchewan did not find a clear growth benefit from a more varied client base.[4] Do not turn more client names into a promise of safety or growth.
Choose the response that fits the gap
Keep a good large client if the work, terms and cash risks fit. You can make the business less fragile without ending that relationship. Start with the weakness your records show.
If unpaid bills are the problem, check approval and payment dates before extending more work. If one client takes nearly all your time, leave room to serve another buyer before promising extra capacity. If losing the client would make basic bills unaffordable, limit new fixed costs and test a backup source of income within a cash limit.
Write down the event that will make you act, such as an unpaid bill passing its agreed date or a renewal remaining unconfirmed. Attach a named next step and review date. Use those records to decide what to do; do not wait for a generic client-share rule to tell you the business is safe.
Sources
[2] https://business.gov.au/finance/cash-flow/set-up-a-cash-flow-statement — cash-flow [4] https://www.bdc.ca/en/articles-tools/blog/diversification-key-recovery-alberta-saskatchewan-businesses — client-risk




